U-Line RNP115 repair
15-inch built-in nugget ice machine, Home Collection. Service for this model across Tampa Bay.
- Model
- RNP115
- Type
- 15-inch built-in nugget ice machine
- Series
- Home Collection
- Years
- Home Collection
- Brand
- U-Line
About the RNP115
Made for an undercounter opening, the RNP115 is a nugget machine in the Home Collection with a digital control panel. Its soft, chewable ice relies on an auger that scrapes frost from the cylinder wall, so anything that coats the wall reduces what reaches the bin.
On an RNP115, we first test for a partly blocked water inlet, since that restricts what feeds the cylinder, then look at scale that makes the auger motor work harder. A drip or puddle at the base during production gets traced to its source before we finish. We give you the price in writing first.
What we check on a RNP115 visit
- Water inlet, when output falls
- Scale loading the auger motor
- Base area, for drips or pooling during production
Key features
- Nugget ice machine for built-in use, 15 inches wide
- Chewable nuggets that are easy to bite
- Digital control panel
- Fits under the counter
The model number is on the serial label: inside the cabinet near the top, on the side wall or behind the front grille. We are an independent repair company, not affiliated with U-Line Corporation.
U-Line ice machine codes
Codes listed for U-Line ice machines. Which ones a unit can show depends on its control generation, so we confirm by the full model number.
Other U-Line ice machine models
Modular 3000 Series3018CLR18-inch Modular clear ice machineModular 3000 Series3045CLRWide Modular clear ice machineADA SeriesACP11515-inch ADA clear ice machineADA SeriesACR01414-inch ADA crescent ice makerADA SeriesACR01515-inch ADA crescent ice makerADA SeriesACR11515-inch ADA crescent ice makerIce MachineADA15IMOlder 15-inch ADA ice makerADA SeriesANB11515-inch ADA nugget ice machineRNP115 questions
What makes the auger motor on an RNP115 strain?
Mineral scale on the cylinder wall adds resistance every turn. Descaling and a good water filter take that load off the motor.
Where does water around the base of my RNP115 come from?
It may come from a loose fitting, the drain or the cylinder area. We watch a production cycle and follow the water back to its origin.