U-Line ACR014 repair
14-inch ADA crescent ice maker, ADA Series. Service for this model across Tampa Bay.
- Model
- ACR014
- Type
- 14-inch ADA crescent ice maker
- Series
- ADA Series
- Years
- ADA Series
- Brand
- U-Line
About the ACR014
Only 14 inches wide, the ACR014 holds the title of narrowest ice machine in the ADA range. Crescent ice comes out of a harvest cycle into a bin sized for a compact kitchen or one break station, and the cabinet height suits accessible counters.
Such a narrow cabinet has little air to draw on, so an ACR014 visit begins at the condenser, where lint or a tight cutout pushes temperatures up and slows ice. We also look for scale on the small evaporator, and we watch how fast the bin fills, since it is smaller than on wider models. The price is written down first.
What we check on a ACR014 visit
- Condenser airflow and cutout clearance, when production slows
- Scale on the small evaporator, when output drops
- Bin fill rate against expected output
Key features
- Crescent ice maker, 14 inches wide, at ADA height
- The slimmest machine in the ADA lineup
- Cabinet height for accessible counters
- Ice produced in a harvest cycle
The model number is on the serial label: inside the cabinet near the top, on the side wall or behind the front grille. We are an independent repair company, not affiliated with U-Line Corporation.
U-Line ice machine codes
Codes listed for U-Line ice machines. Which ones a unit can show depends on its control generation, so we confirm by the full model number.
Other U-Line ice machine models
Modular 3000 Series3018CLR18-inch Modular clear ice machineModular 3000 Series3045CLRWide Modular clear ice machineADA SeriesACP11515-inch ADA clear ice machineADA SeriesACR01515-inch ADA crescent ice makerADA SeriesACR11515-inch ADA crescent ice makerIce MachineADA15IMOlder 15-inch ADA ice makerADA SeriesANB11515-inch ADA nugget ice machineOrigin 1000 SeriesBI1215Built-in crescent ice makerACR014 questions
Why does my ACR014 slow down in a tight cutout?
At 14 inches, the condenser has very little air volume to work with. Lint on the coil or a snug opening raises the temperature, and ice production falls, so we clean the coil and check clearance.
How does scale affect such a small machine?
A small evaporator shows scale quickly, because even a thin layer changes how well cubes release. We inspect it at each visit and descale when needed.