U-Line HNP115 repair
15-inch built-in nugget ice machine. Service for this model across Tampa Bay.
- Model
- HNP115
- Type
- 15-inch built-in nugget ice machine
- Years
- Current model
- Brand
- U-Line
About the HNP115
Soft, chewable nuggets are the whole point of the HNP115, whether in the kitchen or at a home bar. A 15-inch undercounter opening holds it, so the water line is short, the drain close, and there is little room to see behind the toe kick.
When an HNP115 loses output, it often keeps running, which hides the cause. Scale is our first look, because the auger shaft and freezing cylinder work against it, then we check the water inlet and the base for leaks during production. Fewer nuggets with the machine still running is what sends us there. The price is written first.
What we check on a HNP115 visit
- Scale on the cylinder and auger shaft, when nuggets get scarce
- Auger motor strain
- Base area, for water leaking during production
Key features
- Nugget ice maker, 15 inches wide
- Chewable, soft nuggets made by an auger
- Digital control
- Built in under the counter
The model number is on the serial label: inside the cabinet near the top, on the side wall or behind the front grille. We are an independent repair company, not affiliated with U-Line Corporation.
U-Line ice machine codes
Codes listed for U-Line ice machines. Which ones a unit can show depends on its control generation, so we confirm by the full model number.
Other U-Line ice machine models
Modular 3000 Series3018CLR18-inch Modular clear ice machineModular 3000 Series3045CLRWide Modular clear ice machineADA SeriesACP11515-inch ADA clear ice machineADA SeriesACR01414-inch ADA crescent ice makerADA SeriesACR01515-inch ADA crescent ice makerADA SeriesACR11515-inch ADA crescent ice makerIce MachineADA15IMOlder 15-inch ADA ice makerADA SeriesANB11515-inch ADA nugget ice machineHNP115 questions
Why does my HNP115 keep running but make fewer nuggets?
Scale on the cylinder wall and auger shaft reduces what each turn produces, so the motor works while output falls. We descale and test water flow.
What should I do if water appears under my HNP115?
Note where it appears and when, since a leak during production points to the base or inlet. We trace it from the cabinet floor back to its source.