U-Line HCR115 repair
15-inch built-in crescent ice maker, 1 Class Collection. Service for this model across Tampa Bay.
- Model
- HCR115
- Type
- 15-inch built-in crescent ice maker
- Series
- 1 Class Collection
- Years
- 1 Class Collection
- Brand
- U-Line
About the HCR115
Producing up to 25 lbs. of ice a day and holding 25 lb. in the bin, the HCR115 is a built-in crescent ice maker, 15 inches wide, that needs no drain line, so it works where running one would be hard. It is offered in black, white, stainless or integrated finishes.
With no drain on an HCR115, water control is everything. The inlet valve must shut fully, or the mold overfills and cubes stick together. We test that, look for scale on the evaporator that stalls the harvest, and check the bin sensor that can halt production with the bin only part full. The price is quoted first.
What we check on a HCR115 visit
- Inlet valve shutoff, when the mold overfills
- Evaporator scale, when the harvest stalls
- Bin sensor, when ice stops part way
Key features
- Built-in crescent ice maker, 15 inches wide
- About 25 lbs. of ice a day and a 25 lb. bin
- No drain line required
- Choice of black, white, stainless or integrated finish
The model number is on the serial label: inside the cabinet near the top, on the side wall or behind the front grille. We are an independent repair company, not affiliated with U-Line Corporation.
U-Line ice machine codes
Codes listed for U-Line ice machines. Which ones a unit can show depends on its control generation, so we confirm by the full model number.
Other U-Line ice machine models
Modular 3000 Series3018CLR18-inch Modular clear ice machineModular 3000 Series3045CLRWide Modular clear ice machineADA SeriesACP11515-inch ADA clear ice machineADA SeriesACR01414-inch ADA crescent ice makerADA SeriesACR01515-inch ADA crescent ice makerADA SeriesACR11515-inch ADA crescent ice makerIce MachineADA15IMOlder 15-inch ADA ice makerADA SeriesANB11515-inch ADA nugget ice machineHCR115 questions
How does the HCR115 work without a drain?
It manages meltwater internally, so no drain line is needed. That makes the inlet valve and the evaporator the main places we look when something changes.
Why are the cubes from my HCR115 fused?
Usually the mold has taken in too much water because the valve leaks past its seat. We test the valve and look at the evaporator for scale as well.