U-Line Echelon 2000 “SP” Display: Set Point Readout, Not an Error
SP followed by a number, such as SP 38, is the normal set-point readout on a U-Line Echelon 2000 refrigerator. It is not an error and needs no repair.
What does U-Line refrigerator & drawers code SP mean?
Refrigerators in the U-Line Echelon 2000 family that carry the 2010 electronic control, for example the 2175RF and the 2275ZWC, the panel normally reads SP and a number, such as SP 38. That is the set point, the temperature you asked the cabinet to hold, and it is not an error. A different readout means a diagnostic mode was opened by accident. Pressing a key, cycling the power, or leaving the unit unplugged for 1 minute restores the normal view.
SP at a glance
- Code
- SP
- Appliance
- U-Line refrigerator & drawers
- Applies to
- U-Line Echelon 2000 refrigerators, 2010 electronic control
- Type
- Normal status, not a failure
- Can you clear it yourself?
- Yes, it is a normal message or setting
- Most likely cause
- The control is showing the cabinet set point as designed
What you may notice with SP
- The panel reads SP followed by a number such as 38.
- The cabinet is cooling and the lights work normally.
- Sometimes a different readout shows after keys were pressed.
- The odd readout disappears after a key press or a restart.
How the refrigerator & drawers detects SP
The 2010 electronic control keeps the temperature you chose in memory and shows it back to you as SP, short for set point. The number after it is the target for the cabinet, not what the thermometer inside reads at this second. The control compares the real cabinet temperature with that target and switches cooling on and off to keep them close.
It is a status display, so nothing is being detected as wrong. The only time the panel shows something else is when keys have been pressed in an order that opens a diagnostic view. That view is part of the control, not a problem with the refrigerator, and the control leaves it as soon as it gets another key press or loses power for a moment. A longer unplug of 1 minute is the sure way back to the normal readout.
Why SP appears
- The control is showing the cabinet set point as designed
- A diagnostic view was opened by an accidental key press
Can you keep using the refrigerator & drawers with SP?
Yes, keep using it. SP with a number is the unit telling you its set point, so there is nothing to stop or switch off. If a different readout appeared, a key press or a restart normally clears it. Just confirm the cabinet is holding temperature with a refrigerator thermometer. If the display keeps changing by itself and the cabinet drifts warm, treat that as a separate problem and have the control checked.
What you can safely check
- Check the display first; when it reads SP and a number, the unit is working as designed and no safety step is needed.
- If another readout is showing, press any key once.
- When it does not change, turn the unit off with its switch and on again.
- Still there? Unplug it for one full minute, then plug it back in.
- Contact us only if the odd readout keeps returning after those steps.
What our technician does for SP
- Check the keypad for keys that stick and send false presses
- Test the control if it keeps leaving the set-point view
- Compare the cabinet temperature with the set point shown
How to keep SP from coming back
- Wipe the panel gently and avoid pressing several keys at once while cleaning.
- Keep children from tapping the keypad, since an odd key order opens the diagnostic view.
- Place a thermometer in the cabinet so you can check the real temperature against the SP number.
Technical reference
- Code
- SP
- Appliance
- U-Line refrigerator & drawers
- Control family
- U-Line Echelon 2000 refrigerators, 2010 electronic control
- Maker documentation
- U-Line owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with U-Line Corporation.
U-Line models that can show SP
Models named for this code in U-Line documentation that have a page here. Check the full model number on the rating label before you act on a code.
Related U-Line refrigerator & drawers error codes
SP questions
What does SP 38 tell me?
SP is short for set point, and 38 is the target in degrees Fahrenheit. It is the display the Echelon 2000 shows in normal use, not a warning of any kind.
Why would the screen show something other than SP?
A certain order of key presses opens a diagnostic view. Tapping any key, cycling the power, or pulling the plug for a minute returns the panel to the set-point view.
Should I worry if the cabinet reads warmer than SP for a while?
A short gap after loading food or opening the door is normal. If the temperature stays away from the set point, tell us. We test the cooling, and you get a written price first.
Can I change the number after SP?
Yes. The number is the set point, and you adjust it with the temperature keys on the panel. Change it in small steps and give the cabinet time to settle before judging the result.
Is SP the same as a temperature alarm?
No. SP is only the target the control is working toward. It does not report a warm or cold cabinet. A real temperature problem would show up in the food, on a thermometer, or as a separate message.
Something else going on with your refrigerator & drawers?
A technician finds the cause at your bar or lanai and puts the price in writing before any part comes out.